Professional Meteorological Instrument Manufacturer & Designer!

HY-WDC2E

HY-WDC2E Cost-effective Ultrasonic 2D Anemometer is designed for smart city and farm application that require low cost.

HY-WDS2E

HY-WDS2E Ultrasonic Anemometer is designed traffic weather station and industrial applications that require high accuracy and resolution.

HY-WDC6E

HY-WDC6E Compact Weather station is built based on WDC2E ultrasonic anemometer which also integrate temperature,humidity,pressure,precipitation,solar/UV radiation,dust options.

HY-WDS6E

HY-WDS6E Professional Weather station is built based on WDS2E ultrasonic anemometer which also integrate temperature,humidity,pressure,precipitation,solar/UV radiation,dust options.

HY-VTF306BE

HY-VTF306B Visibility detector measures atmospheric visibility by determining the amount of light scattered by different particles (smoke, dust, haze, fog, rain or snow) in the air that pass through the optical sample volume.

HY-IRS2E

HY-IRS2E is a compact infrared temperature sensor. The optical analysis system is sited in a compact aluminium shell. An 90° adjustable mounting bracket allows an easy installation.

HY-RSS11E

HY-RSS11E is a non-contact road surface state detector, thanks to remote sensing technology it’s taken, it can not only avoid damage to the road, But also traffic interference during its installation. Multispectral measurement technology enables accurate detection of thickness of ice, snow, water on surface of the road.

HY-COVIE

HY-COVIE is designed to collect real-time monitoring data of VI and carbon monoxide in-situ, and pass those information to traffic supervision departments, so as to provide decision-making basis for tunnel ventilation and road safety.

HY-WTE

HY-WTE crossed type tunnel ultrasonic wind speed and wind direction detector is specifically designed for for the tunnel application, it’s working based on ultrasonic time-difference method

HY-WDS21E

HY-WDS21E wall-mounted ultrasonic wind speed and direction sensor is specially designed for the tunnel application, it’s installed on the tunnel wall and providing real-time tunnel wind data to total control room, as a basic basis for ventilation and operation.

HY-CDP22E

The HY-CDP22E luminance monitor measures the level of luminance, or brightness, created by natural light at the tunnel entrance / exit to ensure that the visual perception of drivers will be maintained

HY-LXP21E

HY-LXP21E measures the level of illuminance within the tunnel bore to ensure interior illumination levels are being continuously maintained in order to affect safe lighting conditions for drivers. Illuminance, or incident lighting, determines the amount of light that covers a specific surface or area within the tunnel.