Product Description
HY-WDC6E is an advanced all-in-one weather station integrating multiple sensing modules. Its wind measurement system utilizes ultrasonic technology, eliminating the mechanical wear risks inherent in traditional cup-and-vane anemometers. Featuring a corrosion-resistant exterior and requiring no costly on-site calibration or routine maintenance, the HY-WDC6E delivers true plug-and-play functionality with rapid deployment capabilities.
The shell is made of ASA engineering plastic, which has high outdoor weather resistance. ASA is extremely resistant to UV radiation from the sun; it is frost and heat-resistant, enduring all climatic conditions for over 10 years.
The HY-WDC6E can realize simultaneous measurement of multiple parameters: wind, temperature, humidity, pressure, precipitation, solar radiation, luminance, noise, PMs, and visibility. Precipitation can be detected using either a 24GHz radar or a piezoelectric module.
Technical Specification
Parameter | Measure Range | Accuracy | Principle |
Wind Speed | 0 ~ 40 m/s | ± 5% | ultrasonic |
Wind Direction | 0 ~ 360° | ± 3° | ultrasonic |
Temperature | -40~+70℃ | ±0.5℃ | NTC |
Humidity | 0-100% | ±2% | Capacitive |
Pressure | 150-1100hPa | ±0.5 hPa | Piezoelectric |
Rain Intensity | 0-500mm/hr | - | Piezoelectric Or Radar |
Accumulation | 0~9999999.99mm | ±10% |
Luminance | 0-200000lux | ±5% | photoelectric |
Solar Radiation | 0-2000W/m2 | ±5% | photoelectric |
PM1.0/PM2.5/PM10 | 0-500ug/m3 | ±10% | Laser scattering |
Visibility | 10~10000 m | ±20% | Laser scattering |
Noise | 30-130 dB | ±3dB | microphone |
Power supply | 7-24VDC 15..120 mA@12VDC |
Operating environment | Temperature: -40 to +70°C Humidity: 0 - 100 %RH non-condensing |
IP Grade | IP65 only when vertically installed |
Interface | RS232 or RS485 or SDI-12 or 4-20mA or 0-5V |
Protocol | ASCII active output or NMEA0183 or MODBUS-RTU or SDI-12 |
Dimension Wegith | Φ144×210 mm ASA:0.5kg |